Eaton DX 2000VA, 220V, W/o Battery Capacity 2000VA/1400W
SPESIFIKASI :
| Topology | Online double-conversion IGBT with micro-controller |
| Configuration | Tower |
| Part Number | EDX2000HXL |
| Rating (VA/Watts) | 2000VA/1400W |
| UPS Bypass | In-Built Automatic Relay Bypass |
| Dimensions (H x W x D, mm) | 340 x 192 x 460 |
| Weight (kg) | 15 |
| Warranty | 1 year standard warranty |
| Efficiency | >85% |
| Electrical Input | |
| Connection |
(1) IEC-320-C14
|
| Input Voltage Range | 122V to 300V |
| Nominal Voltage | 220V |
| Voltage Range | 208/220/230/240V |
| Frequency | ’50/60Hz, auto-detection |
| Frequency Range | 46Hz – 64Hz |
| Input Power Factor | > 0.95pf |
| Input Current Distortion | <30% THDi |
| Electrical Output | |
| Voltages | 208/220/230/240V |
| Nominal Voltage | 220V |
| Voltage Range | 208/220/230/240V |
| Output voltage regulation | ±2% |
| Output Receptacles |
(6) IEC-320-C13
|
| Output Frequency | 50 / 60Hz |
| Load Crest Factor | 3:1 |
| Battery | |
| Battery Type | No Internal batteries |
| Communications | |
| User Interface | Led’s |
| LEDs | LED mimic diagram with 4 x LEDs for Utility, Bypass, Inverter & Battery Status, |
| Audible Alarms | Battery Operation Mode, Low Battery, General Fault, Overload, On Bypass |
| Communication Ports | 1 off Intelligent-Slot (Empty), 1 x RS232 DB9 Serial Port |
| Power Management Software | WINPOWER power management software, included on CD |
| Environmental & Standards | |
| Audible Noise | <50dB |
| Operating Temperature | 0°C to 40°C |
| Safety markings | CE |
| EMC Markings | IEC/EN 62040-2 Category C3 |
| Markings | CE, C−Tick |
| Data Line Protection | Input / output jacks included for telephone / modem / internet line surge protection |
| Storage Temperature | 0°C to 40°C |
| Relative Humidity | 5 to 95%, no condensation allowed |
| Altitude | 1000m above sea level |
