Technical Information :
| Model | IPS1200A | ||
| Capacity | 1200 VA / 720 W | ||
| Input | Voltage | 220/230/240 VAC | |
| Acceptable Voltage Range | 170 – 280 VAC (UPS mode) | ||
| 90 – 280 VAC (INV. Mode) | |||
| Frequency Range | 60Hz or 50 Hz (auto sensing) | ||
| Output | AC Voltage Regulation (Batt. Mode) | ±10% | |
| Frequency Range (Batt. Mode) | 60 Hz or 50 Hz ±1 Hz | ||
| Transfer Time | 20 ms typical | ||
| Waveform (Batt. Mode) | Simulated Sine Wave | ||
| Battery | Battery Voltage | 12 VDC | |
| Low Battery Alarm Voltage | 10.2 VDC ± 2% | ||
| Overcharge Protection | 15.0 VDC ± 2% | ||
| AC Charger | Constant Current Charge Voltage | 14.3 VDC ± 2% | |
| Floating Charge Voltage | 13.7 VDC ± 2% | ||
| Maximum Charge Current | 10 A or 20 A | ||
| Solar Charger | Maximum PV Array Open Circuit Voltage | 40 VDC | |
| Operating Voltage Range | 15~18 VDC | ||
| Maximum Solar Charge Current | 30A | ||
| Protection | Full Protection | Overload, and short circuit protection | |
| Indicator | Line Mode | Green lighting | |
| Battery Mode | Yellow lighting | ||
| Low Battery | Yellow flashing every 2 seconds | ||
| Shutdown Mode | Yellow flashing every 5 seconds | ||
| Charging Mode at Power On | Green flashing every 2 seconds | ||
| Charging Mode at Power Off | Green flashing every 5 seconds | ||
| Overload | Red flashing for 0.5 sec. every second | ||
| Overcharging | Red flashing every 5 seconds | ||
| Fault | Red lighting | ||
| Alarm | Low Battery | Sounding every 2 second | |
| Overload | Sounding every 0.5 second | ||
| Overcharging | Continuously sounding for 30 minutes, then shutdown | ||
| Fault | Continuously sounding for 30 minutes, then shutdown | ||
| Physical | Dimensions (mm), D X W X H ( mm) | 293 X 231.5 X 82.5 | |
| Net Weight (Kg) | 2.35 | ||
| Operation Environment | Storage Temperature | -15℃ to 50℃ | |
| Package Content | 1 x IPS1200A Inverter 1 x Quick Start Guide 1 x External Battery Connector |
||
| Warranty | 1 Year | ||